Clear the AUX line, reverse telnet session starts again

Question:

I have a rollover WS-C3750X-48P-L cable between two 3925 routers (AUX->Console) whilst I am remotely configuring a device.

I have setup reverse telnet to get access to the device needing configuration and when I try and reconnect through the Aux port again, I get an error:

Trying 192.168.1.1, 2001 ...

% Connection refused by remote host

The first time it connected without issues. If I check with who and sh line I find that the session is still idle.

I've tried to clear it with clear line aux 0, and clear line 1 which I confirm it clears it, but all that happens is the idle timer starts from 0 again.I've changed the exec-timeout to 1 minute, and after a minute the counter starts again.

Also I tried to remove the transport input telnet to break the session but its still not disconnecting.

    Line       User       Host(s)              Idle       Location

   1 aux 0                idle                 00:00:11 

*578 vty 0     jason      idle                 00:00:00 10.1.1.1

line aux 0

exec-timeout 1 0

transport output all

transport input telnet

stopbits 1

Currently running: c3900e-universalk9-mz.SPA.151-2.T4.bin

Anyone have any ideas?

Answer:

Can you actually configure your AUX 0 with no exec command? In this case, you do not want to run shell on this aux port whenever a newline comes from the attached device. WS-C3750X-48PF-L Price

For more Cisco WS-C3750X-48P-L Price news about Price ans Specification, you can click here http://www.3anetwork.com/cisco-ws-c3750x-48p-l-price_p118.html